fbpx

Online CNC Programming and Operating Training

We CAMtutor are professional in making NC programming Services for various types of CNC machines, with the same spirit, we provide online CNC Operating and CNC Programming training course for those, who willing to develop their career or becoming an entrepreneur in the field of CNC machining,

The content of this course is divided into levels, such as a CNC Operator Level, a CNC supervisor level and a CNC Engineer level.

This course starts from the scratch of understanding the basic fundamental of CNC Machining, Operating of CNC machines (i.e.) each and every Operating keys and different modes of a CNC machine (with the help of Virtual CNC machine), Manual G code and M code Programming writing and CAM software for CNC milling (VMC &HMC)and CNC turning operations.

FAQs

Course Content- Level 1 – CNC Operator

  • History of CNC machines.
  • Advantages & Disadvantages of CNC
  • Types of CNC Machines
  • Major CNC machine Manufacturers
  • Mechanical basics
  • Electrical basics
  • Axis Direction
  • Types Spindle taper
  • Types of holders
  • Tool material selection & Characteristics
  • Types of tools
  • Types of operations
  • Types of clamps & fixtures
  • Machine Control Panel Operating (JOG Mode, MDI, Edit, Auto, Single block, etc.)
  • Work offset & tool offset on machines & software (Geometry offset, Wear offset.)

Course Content – Level 2 – CNC Supervisor

  • Engineering drawing reading & understanding
  • Process planning
  • Typical G codes & M codes
  • Absolute Coordinate & Incremental Coordinate
  • Feed, Speed & Tool change Commands
  • Basic Motion Commands with Examples
  • Program Structure
  • Cutting tools and Cutting parameters calculation.
  • Professional Programming with process planning sheet
  • Machining Operations from Bar stock
  • Sample Casting Models for Programming.

Course Content – Level 3 – CNC Engineer

  • Advantages of CAM software
  • Applying of tool paths
  • Check simulation for collisions & Proper tool movements.
  • Generating shop documentation & setup sheets
  • Generating NC codes
  • Cycle time calculation.
  • Programming transfer using RS232 & Flash card.

Learners Outcome – CNC Operating and Programming

On Successful completion of CNC Operating and Programming course the person.

• Will get a good knowledge about , machine axis, controls, machining operations, cutting tools, holders and other required basic fundamentals of CNC machining.
• Will get a deep knowledge on operating CNC machines, with all modes like Auto, MDI, JOG etc
•Can understand to take work offset and tool offset on CNC machines.
•Can able to wright NC program like part program, sub program, cycle for milling and turning machines.
•Can able to make 2D and 3D part model for machining.
•Can apply tool paths for production and Die moulds parts.
• Apply tool paths for 4th Axis parts
• Apply tool paths for 2 Axis CNC lathe components.
• Generate NC programs for applied tool paths.
• Generate shop floor documents for given part.

How Online CNC Training work ?

Make an Enquiry and get fee details